Castle Creations' introduction of the Mamba Monster was a breakthrough moment for the RC world to experience what seemed to be unobtainable. brute power and sheer stamina! This Mamba Monster is capable of 2S LiPo to a maximum of 6S LiPo with a waterproof design to give you peace of mind to enjoy your vehicles in muddy, snowy and wet conditions without worrying about damaging the electronics!

Features an adjustable internal BEC with a peak of 8.0V, factory equipped and fully removable cooling fan, LED error codes for common error conditions, redesigned rotor and stator assemblies, reduced magnetic cogging, producing less residual drag brake, increased efficiency, resulting in lower temperatures and longer run times, smoother start-up, reducing cogging or stuttering when starting from a stop, high-performance 0.2mm steel lamination stacked stator oversized high quality NMB bearings!

The Mamba Monster 2 includes a coupon for a free Castle Link USB device. This allows access to the full programming suite of adjustable settings that tune and tweak your vehicle to your preferences, resulting in an incredible RC driving experience. This combo includes the Mamba Monster 2 controller and the recently updated Castle 1515-2200kV V2 sensored motor (Sensored capabilities of the motor cannot be utilized with the Mamba Monster 2).

ESC Features:

Adjustable Internal BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Factory equipped (30mm), fully removable cooling fan
Waterproof design allows for use in nearly any environment
LED error codes for common error conditions
Convenient transmitter programming for nine common adjustable settings
Full compatible with the Castle Link Programming Suite or the Castle Link iOS App and a B-LINK Bluetooth Adapter. (sold separately)
Proudly Designed, Assembled and Supported in Olathe, KS USA
Backed by Castle Creations' 1-year warranty

Motor Features:

Redesigned rotor and stator assemblies
Reduced magnetic cogging, producing less residual drag brake
Increased efficiency, resulting in lower temperatures and longer run times
Smoother start-up, reducing cogging or stuttering when starting from a stop
Rebuildable design allows replacement of front end bell/bearing assembly or rotor/shaft assembly
High-Strength kevlar wrap and 180C grade neodymium sintered magnets
Oversized NMB bearings and high-temperature, high-purity copper windings
Castle 10 AWG, high-strand-count silicone-insulated wire with 6.5mm bullet connectors
High-Performance 0.2mm steel lamination stacked stator
Oversized, low-resistance, gold-plated solder tabs
Sensor board with high-quality temperature-stabilized sensors
T6 aluminum CNC-machines front and rear end bell
Proudly designed and supported in Kansas, USA
Backed by Castle Creations' 1-year warranty

Specifications:

ESC:

Input voltage range: 2S-6S LiPo
BEC Specifications: Adjustable - 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak) (5.5V default)
Length: 2.09" (53mm)
Width: 1.93" (49mm)
Height: 1.44" (36.4mm)
Weight: 3.92oz (111g)
On/Off Switch: Yes
Cooling Fan: Yes, factory equipped
Connector: 6.5mm female bullets for motor connection
Wire Gauge: 8AWG

Motor:

Application: Ideal for 1/8 scale buggies, truggies, on-road vehicles and 1/10 scale monster trucks up to 15lbs
Input Voltage Range: 2-6S LiPo
Kv Rating: 2200Kv
Max. RPM: 60.000
Diameter: 1.57" (39.98mm)
Length: 2.96" (75.18mm)
Shaft Size: 20mm(Length), 5mm(Diameter)
Weight(w/wires): Approx. 15oz (452.2g) (W/Wires)
Mounting Hole Specifications: (Holes) 4mm & 3mm / (Spacing) 25.4mm
Connectors: 6.5mm male Castle Bullet Connectors

NOTE:

CSE011-0130-00 Rotor Replacement is NOT compatible with the V2 motor. A new rotor replacement will be available in the future.

Includes:

(1) Mamba Monster 2 ESC
(1) 1515-2200kv V2 sensored* brushless motor
(1) Coupon for free Castle Link USB adapter
(1) Driver's Ed and Quick Start Guide
(1) Decal sheet

Castle Creations

Our brands